Skip to main content

1. Why is there a mixer on the software, when its not useable via VMS4?
2. Why does the 2 samplers go out on fader 2 and 3, when they have there own vol control?
3. Why cant the effects be synced with the beat of the track?
4. Why cant you see Smart Loop length, before activating?
5. What is the difference between Loop being Red/Blue?
6. Touchstrips no function?
7. Why is there no Pitch tempo range info, when i change it?
8. Keylock error. Example: Play a track, set Keylock off, pitch to +/-12%, pitchfader to + or -12%, activate Keylock, and the key is set from +12% not 0% as every CD player does. (it dosent matter what range the pitch is in)

9. Where are the last 2 out of the 4 decks they prommised? Its called a VMS 4, or did i get it wrong?
10. What are the letters under Pitch +/- buttons on the left player, and what happens when i click on it?


Just a few problems i ran into.

VDJ LE 6.1
Original Post

Replies sorted oldest to newest

I dont mean to offend you, but your questions would be maybe more appropriate on the VirtualDJ forums. Secondly, maybe you have never used DJ software before. Finally, many of your questions are simply retarded.
Most have a 'mixer' section, (eq band) on them. On VDJ you do have the option to 'turn it off' so to speak. Its basically a skin. Its there in case someone is using full on midi mode where also the eq of the software is used. then it would be ideal to have it.
your question 5: its basically the two decks, red is one deck and blue is the other deck.
q6) you have to assign a function to it yourself.
For full use of the VMS6 you gonna need something more than the LE version of VDJ.
@ Souf Thanks...

@ The Technician.
1. The mixer on Virtual DJ LE is not mapped because the VMS4 by default mode use it audio interface and routes you PC's audio steam to the Digital mixer.
2.The sampler is routed to deck a and b in virtual DJ LE because of the 4 asio channel interface.The volume knob is simply a parameter change.
3.What effect are you talking about the effects and sample actually use you decks BPM, try it again.
4. because you haven't set a loop. did you?
5.If you are refering to the LED then the answer is "BLue" means that smart loop is active,to deactivate it press shift + Loop/smart. "RED" means there is an active loop in that deck this button will also set a "1 baet loop"
6.The touch strip has 2 layers like a cake. the first layer is not mapped. Press Shift+ slide you finger lightly on the strip up or down to scroll thru you loaded track.
7.That is a skin thing
8. can you paraphrase this, Please.
9. it has a four channel mixer and can interface with 4 virtual decks. We never made any promise.
10. That is your key value in different scales.
quote:
Originally posted by Souf:
I dont mean to offend you, but your questions would be maybe more appropriate on the VirtualDJ forums. Secondly, maybe you have never used DJ software before. Finally, many of your questions are simply retarded.
Most have a 'mixer' section, (eq band) on them. On VDJ you do have the option to 'turn it off' so to speak. Its basically a skin. Its there in case someone is using full on midi mode where also the eq of the software is used. then it would be ideal to have it.
your question 5: its basically the two decks, red is one deck and blue is the other deck.
q6) you have to assign a function to it yourself.
For full use of the VMS6 you gonna need something more than the LE version of VDJ.


1. The mixer section is unnessery, since you cant map any byttons in VDJ LE. (Solution: a skin without mixer)
2. Your wrong with the RED/BLUE button. Try again...
3. Again, you cant map any buttons in VDJ LE, therefore you cant map the strip to anything.
4. Now ho is retar...?
quote:
Originally posted by Ihearyou(American Audio):
@ Souf Thanks...

@ The Technician.
1. The mixer on Virtual DJ LE is not mapped because the VMS4 by default mode use it audio interface and routes you PC's audio steam to the Digital mixer.
2.The sampler is routed to deck a and b in virtual DJ LE because of the 4 asio channel interface.The volume knob is simply a parameter change.
3.What effect are you talking about the effects and sample actually use you decks BPM, try it again.
4. because you haven't set a loop. did you?
5.If you are refering to the LED then the answer is "BLue" means that smart loop is active,to deactivate it press shift + Loop/smart. "RED" means there is an active loop in that deck this button will also set a "1 baet loop"
6.The touch strip has 2 layers like a cake. the first layer is not mapped. Press Shift+ slide you finger lightly on the strip up or down to scroll thru you loaded track.
7.That is a skin thing
8. can you paraphrase this, Please.
9. it has a four channel mixer and can interface with 4 virtual decks. We never made any promise.
10. That is your key value in different scales.



1. That means that there is no realy use for it, so why not remove it, or make it selecteable on/off?
2. Ok.
3. Echo, Flanger, Brake and Backspin cant be synced to beat. :-(
4. no, but wouldent be good to know how many beats long the loop is before you activate SMART LOOP.
If you last had it on a quarter beat loop and now want a 4 beat loop, you have to activate it first, and then change
it.
5. Can you please check that again? I can se no difference in Loop length wether its Blue or Red.
Change one, and the other has the same lenght.
6. Ok.
7. Will that change?
8. With Keylock of, you can here the change in key when you change the speed of the track. (Normal)
But when you take the pitchfader to example +12% the key gets higher (normal), now activate Keylock, and VDJ locks in
the key at +12% pitch, not 0% like every other CD player.
Now changing the speed to -12%, you can here that keylock is holding the key from +12%. (High pitched, but slow)
Key lock is ment to hold the key at 0%, so that voices dont sound mousy when you pitch the speed up.
9. Hmmm.. :-(
10. Ok.

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×