Skip to main content

8 replies

vms4 & winamp

FM Former Member
having trouble with winamp and vms. i am using a karaoke program, sax and dottys which uses winamp. i am also using vdj7 which the vms is reading and working audio fine. i have gone thru winamp and in options done the changes to set the vms as audio using the directsound options as output and i get the following error

"" nullsoft directsound output v2.6 (d) error
bad directsound driver please install proper drivers or select another device in configuration error code 80004005"
any suggestions?
Original Post

Replies sorted oldest to newest

FM Former Member
on the drop down menu on winamp your only choices are nullsoft directsound or vms4. there is not a third chice to pick asio. seemsto be a problem of winamp not talking to vms4 and this karaoke program uses winamp.

on my other compeuters where i am using a rne mp4 there is not a problem it uses primarey sound from the computer and runs right thru one channel on the mixer. same thing if i use the laptop on say a mackie 8 channel mixer using usb connection
FM Former Member
I would check the Winamp forums. There are ways of adding drivers into the code of Winamp since it is open source. But I forget off the top of my head how to do it since it has been years since I have had to.

The guru's there should be able to help since it seems to be on that end as you have stated.

Add Reply

Post

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×