Skip to main content

Hi. I have My DMX 2.1 and 4x Mega Tripar Profile Plus units.

I would like to create a scene that effectively makes the units respond to sound, rather than a pre-programmed scene, just as if the units were set to sound activated mode on their own. I see you can set the fixture to be in sound activated mode in "Channel 7" - however the fixture doesn't seem to want to do anything. When out of DMX mode and in "manually set" sound activated mode - it works fine. Any tips would be really appreciated. 

Original Post

Replies sorted oldest to newest

A video won't be enormously helpful. The issue is as exactly described in the original post. With the lights in DMX mode and connected successfully, if set to Sound Control mode is activated (channel 7) and the sensitivity set max, the lights stay dark and do not respond to audio from speakers. If the light is disconnected from DMX and sound activated mode set, they respond fine and change colours according to music volume.

The

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×