Using Morphous MFaders and ETC source4-19

Former Member

HI Everyone
Im a newbie so go easy on me

I have been lighting live stage preformances for about 30 years for Schools and Community Theatres in the MN area. By day Im a Sales Engineer for a design company.

Have an application for a computerized control for some "portable" live preformances it seems like MYDMX is perfect and my HS students can easily program this.

My question is I have some Morphous MFaders and Etc source 4 that provide the light source for them, but I dont see a listing for these units in the profiles.

How do I go aboput build or getting these in to my scanlibrary

Thanks
kimarky

3/7/103:14 PM

❤️ 0

Original Post

Replies sorted oldest to newest

JinglesForum Admin

I assume the Mfaders are the dimmer pack and i know what the source 4's are. If it is a standard 1 channel dimmer pack then just use a generic dimmer profile found in the generic folder and make sure it is addressed properly. ok? Welcome to the forums.
Sincerely,

3/8/101:35 PM

❤️ 0

Former Member

The Mfaders are Wybron 3 color scrollers without a light source but a 3 channel CMY DMX address for the color,
http://www.morpheuslights.com/prod1.php?id=9

Kimarky

3/12/109:12 AM

❤️ 0

JinglesForum Admin

Oh ok. Then in the generic folder look for CMY. Should do the trick. and also source 4's will be generic Par.
Sincerely,

3/12/1011:02 AM

❤️ 0

Former Member

I tried that but the light source isnt controlable just the color
what I need is a 3 channels of color control and 1 light intensity.
any thoughts?

Im also trying to gangs 2 fitures to one dmx channel it seems like I can drag them in 3D mode and drop them on top of the other ie dmx 4 to dmx 2 but the control channel 4 is not useable?
My second thought was to put the cross light up on dmx 100 then the unuseable channel is out of the way.

any thoughts

3/17/108:10 PM

❤️ 0

Skip to main content

Add Reply

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...