The Max Fixture problems

Former Member

Hello,
Has anyone had problems with the gobo or color wheels spazzing after a while of being on? If so do you know what this problem might be or how I can fix it. The logic boards seem to have a resistor that looks like it slowly fried over time. Thanks!
-Patrick

1/11/037:23 PM

❤️ 0

Original Post

Replies sorted oldest to newest

Former Member

Welcome to the Forum!! Glad to have you!! Your best bet is to call ADJ Tech support on monday to get the best answer. I know they had motor troubles with that light but I don't think it was the motors on the gobo and color wheel. Might be the board.

1/11/037:53 PM

❤️ 0

Former Member

I am not sure if this will help but, go to adj's main page, and click on the drop down menu where it says lighting products. After the drop down menu comes up...scroll all the way down to the bottom and click on where it says DISCONTINUED. After that scroll don until it says MAXX, click on it and it will give the products' specs. Hope this helps!

-AMP

1/11/038:18 PM

❤️ 0

Former Member

I have seen resistors fired in them before. cap's are fired in pockets every 8 months (early ver though)

1/11/0311:55 PM

❤️ 0

Skip to main content

Add Reply

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...