Skip to main content

We have recently purchased two mydmx buddys. One of our venues needs a soft patch. Otherwise we will have our 8 socket LX bar 1 controlled by faders 1 to 6 then faders 19 and 20 for the last two sockets. This is caused by 3 phase dimmers with only 6 channels and not having more that one phase per bar.

So: Is there a way to setup a soft patch in MyDMX 2.1?

Ch 1 to 6 to control DMX out 1 to 6. Ch7 and 8 to control DMX out 19 and 20.

There are other LX bars that need this treatment, but you get the idea.

Think that makes sense? 

Original Post

Replies sorted oldest to newest

I really can't think of anything that does that off-hand. I think MAYBE the old Compu Live software did that, as i remember it had a channel offset function. If you have a MyDMX device that can be upgraded through the Store.dmxsoft.com, that would be the suite 1 software in the list of applications. Or If you are on Facebook, i'd join this group and ask the pros what they know of that will do it.  
https://www.facebook.com/groups/lightingtrainer/ 

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×