Skip to main content

Replies sorted oldest to newest

Hello....

I have been trying to download the profiles from dropbox however I only get this message, for days now....

Error (500)
Something went wrong. Don't worry, your files are still safe and the Dropboxers have been notified. Check out our Help Center and forums for help, or head back to home.

Please advise. The profiles that came with my adjmydmx2 are not all there and I have been searching the message board and it seems that dropbox doesn't hold anything, or anything for very long.

Mainly I am looking for the Chauvet Motion Drape
quote:
Originally posted by technojohn:
quote:
Originally posted by dheiny93:
can i get the profile for the blizzard lighting stormchaser. below is the manual

http://www.fullcompass.com/com...tormchasermanual.pdf


here is the 2 channel profile, i will update it shortly for all modes

https://www.dropbox.com/s/8ixo...g%20stormchaser.ssl2


Hey technojohn, any luck with updating the Stormchaser for all modes? Thanks.
quote:
Originally posted by technojohn:
i have just not had any time to sort out the full profile with all modes due to work, when i have some free time i shall finish it

Sir could you help me create a profile for my mini moving head 30'watts i send request to support team but until now I still not receive any help there is no manufacturer info nor any web site to get manual so I have it here, please reply if you can help me and I can send all dmx values and info thank you very much
Good evening. Im trying to program several Chauvet Color Band Pix and for some reason when I load the fixture in MyDMX 2.0 the first three faders are controlling the RGB for ALL lights in 12 channel mode. It does not allow control over the 4 banks of lights like it is supposed to. Can someone please update/Fix the profile so that it does what it is supposed to? Or, Am I missing something?

EDIT: Here is the link to the Manual. Thx.
http://www.chauvetlighting.com...d_PiX_UM_Rev6_WO.pdf


Thanks,
Tony
I'm pretty new to much of the lighting and programming but have recently purchased some moving head LED's from Vitop off of AliExpress. I'm trying to figure out how to build a profile based on the 12 channel guide they sent me. Up to this point it has been drag and drop. Helpful advice would be much appreciated.
Just installed software and got my DMX2.1 working I currently have quite a list of lights that I will be adding into a large show I need to programme up for the Xmas season.
I have opened up software and I see there is no profile for new ADJ Focus Spot Three Z I have 4 on order Also the Inno spot Pro Beams dont show up when activated. Pocket spots do o they are all ok.
Thanks Sean

I have tried to download profiles from Dropbox for days now but only get this message. An error seems to be occurring. Something has gone wrong. Your files are still safe, and Dropbox has been notified. For help, visit our Help Center or forums, or head home. Feel free to advise Bad Bunny Sweatshirts. My adjmydmx2 did not come with all the profiles, and I found a message board discussion that suggests that dropbox doesn't store anything or anything for a very long time.

Last edited by Mercktaylor675

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×