recording mixes with VMS4

Wow, is this site dead or something?..help would reeeally be appreciated..

Hello there I,ve had the same problem it seems the solution is that u need to use the internal mixer on your software of choice to be able to use the internal recorder.

To do this u need to disable the vms4's mixer section by switching it off then holding down the 4th monitor cue button and switching it back on again then release the button after about 2 seconds , then u have to map the vms4's mixer section to the software of you choice this includes all the gains eq high mid and low , the upfaders , the crossfadert , the cue/mix/master rotary the crossfader curve , the headphone gain and the master volume and balance....and also the headphones monitor cue buttons which are the only ones i am having trouble with see my post about them as i am waitng for some help myself....

hope this helps ya !!!

*moved to the VMS board*

Hi There!

Could anyone suggest/explain the easiest way of recording my mixes? I use VDJ 7LE and the inner recorder doesnt work.

External recording is your best bet. Either CD-R, DVD recording deck or some digital recording method to a USB stick, SD card or direct to hard drive.

Prices vary depending on what you need. Ranges from stupid cheap to "holy crap, I gotta use my house as collateral" type pricing. It also depends on what you need to to. Make sure you have line inputs and I'm sure you can get something GOOD for under $250.

Looping back into your computer for recording is a recipe for grief.