Skip to main content

I own a DMX operator (not the "pro") which has 12 fixture buttons and 8 regular faders and two additional faders for speed and fade time and eight scene buttons I have four cans and a ADJ T16F chase control. Last year I called an ingenious tech at ADJ and he gave me instructions on how to use the T16F in slave mode with the DMX as a dimmer control. I am ashamed to say I did not write down the instructions but I did use the DMX operator to effectively individually dim or brighten my four cans at will for 3 different video shoots. After letting a year go by I can not remember how to do it. I remember entering program mode for fixture 1 and I also recall assigning fader 2 to a very specific number for example 252 or 202 not sure exactly. I also remember hitting the blackout button afterwards. After this programing:.... faders 3,4,5,and 6 controlled the dimming of cans 1,2,3 and 4 perfectly. If anyone knows the specific of how to do this I would appreciate any help.
Original Post

Replies sorted oldest to newest

alright your controler is similer to mine.... im not sure what your wanting to do. but here are the steps of how to set a scene. press and hold the program button untill the program light lights up- select a fixture - set your sliders - push the midi/add button- and then chose a sceen button to save everything. after you press it all the led's should flash on your controler....

this should hopefully help you out..
I have the DMX Operator(not the Pro) and am very familiar with it, but don't ask me to program it from memory, I forget that part.

I don't see any T16F chase pack, but I bet you simply throw it into DMX mode via the simple buttons and then you're ready to go. If you set the light to be on "1", then faders 1-4 on scanner 1 is all you need.

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×