Profiles for ADJ fixtures

Former Member

Why can't I get the colors to show properly on the 3D Visualizer? Are the preloaded profiles on MyDMX complete or do they need to be 'tweaked'? I know I must be missing something here and I vaguely recall something Jingles posted earlier about some setup info but I've looked and cannot find it on the forums. Apologize for overlooking something already there. Thanks all!

5/12/124:08 PM

❤️ 0

Original Post

Replies sorted oldest to newest

JinglesForum Admin

I need a little more detail. What colors on what profile?
Sincerely,

5/12/124:31 PM

❤️ 0

Former Member

ADJ fixtures: Megabar 50 RGB (7 ch), Megapixel (7 ch), Vizi LED Spot (12 ch). I am looking to custom mix colors on the Megabar/Megapixel fixtures, as well as use the color macros on ch 4 and the programs on ch 6. On the Vizi, to be able to see the colors from the color wheel on ch 5. I'm sure I need to define them somehow to make them show in the Visualizer but don't have any idea where to do that. Does that help define the problem? Thanks for always being there to help us out.

5/12/127:59 PM

❤️ 0

JinglesForum Admin

Those should output the correct colors when color mixing providing you have the dimmer at full intensity. But the color macros and programs will not be shown in the 3D as there is no way for us to program that data into the profile.
Vizi should work fine providing you have the dimmer and shutter open on the channels.
Sincerely,

5/12/1211:30 PM

❤️ 0

Former Member

Then, does CompuShow handle the color macros and programs in the Visualizer?

5/13/126:09 AM

❤️ 0

JinglesForum Admin

No, only pre assigned colors like from a wheel or color mixed.
Sincerely,

5/13/1210:57 AM

❤️ 0