Profiles

Hello Steve, Welcome to the forums. I will not be able to get these to you untill tuesday at the earliest.
Sincerely,

thats great thank you so much for your prompt reply and great service

do you have a copy of the 4 and 9 channel profiles for the ADJ tripleflex by chance please?

Hello!
Please could someone send me the Equinox Dualize profile? I bought them the other day, couldn't get them to work with MyDMX and ended up running a party with just LED Pars :0S I have another coming up soon so it would be greatly appreciated!! Thank you!! product link - http://prolight.co.uk/images/m...ED45/EQLED45-um0.pdf

Wired give me about 48 hours to make this. Also please note this light will not be properly visualized in the 3D as my dmx 3D app will not allow a dual mirror scanner.

Steve I'm still making your profiles. Will get them to you ASAP.
Welcome to the forums Wired.
Sincerely,

quote:

Originally posted by Jingles:
Wired give me about 48 hours to make this. Also please note this light will not be properly visualized in the 3D as my dmx 3D app will not allow a dual mirror scanner.

Steve I'm still making your profiles. Will get them to you ASAP.
Welcome to the forums Wired.
Sincerely,

any news yet mate on my profiles please

My apologies steve. We have Monday off but I'll make your profiles then and send them to you the minute they are done. Again I am very sorry for the delay. Where are you located?

no worries mate i am based in Reading Berkshire Uk. will the duelize still work even though they are duel mirrored mate
cheers
steve

Looking at the traits they should. You just won't be able to use and sort of pan and tilt function in the EFX generator.
Still making profiles. Thanks for your patience. sometime tomorrow for sure.
Sincerely,

OK here is what I have made so far. I was trying to make all of them but when i went to make the multiplex and Heptagon fixtures my profile creator crashed. I will try again in a little bit to make those but right now I'm tired of it crashing on me.
KAM LED Mushroom: http://db.tt/6j64TxT
Equinox Dualize: http://db.tt/0J6xIw0
Equinox Zodiac: http://db.tt/rSPIPUR
Will make the Qtx profiles very soon.
sorry for the delay.
Sincerely,

no worries mate just send them to me when they are done and it stops crashing!!!

Tried a different version of the profile creator and that one didn't crash. Weird it was a "older" version than the one i was using. oh well. haha.
QTX Heptagon: http://db.tt/wEevk8j
QTX Mulitplex: http://db.tt/hZSb7Pt

Again my apologies for the long delay.
Sincerely,

thank you so much jingles your a legend for doing all my profiles
thanks again
steve

Your welcome steve. Enjoy. If you need anything else let me know.
Sincerely,

Need profiles for
Equinox scantastic
Adj revo 4

Revo 4, Four ch mode
I'll need a link to the equinox product please.
Sincerely,

Hi All,

The profiles that you all are requesting are merely copies from the user manuals for the various fixtures, and are actually very simple to create in the scan library editor.

Each of the profiles will be different according to the number of DMX channels, and what each channel does, but you can create these very easily by just adding the channels, one by one, and splitting down each channel into the different values, as per the manual.

What is difficult however, is creating a 3D visualisation for these various fixtures, but for most fixtures it is not impossible.

The American DJ Nucleus for example, consists of six pan and tilt motors with lamps etc., which cannot be realised by the scan editor in normal use, but there is nothing to stop you creating six individual scanners and assigning them to the same DMX channels to give you full 3D visualiser capabilities.

I have done it, and it works just great.

There are some anomolies with the rotation function in MyDMX, so I had to turn the stage on it's back, and view it from above, in order to get what I needed.

This is just buggy software, but the logic is still there, it just needs the odd work-around.

It is best if you create the profile with the fixture in front of you, as manuals are not always accurate. (The Nucleus colours were completely wrong).

I have also succesfully created profiles with full 3D visualisation for the Equinox Domin8r and Scantastic4, so I now can design scenes that use these fixtures directly from my laptop.

I cannot at this stage find any way to sensibly create a 3D visualisation of the Dualizer, or the Revo 4.

It is a real pity that MyDMX does not have any beat detection features, as this is an absolute "must-have" in my opinion.

Hi there, I'm afraid I'm a newbie to the mydmx world so firstly can I ask if the is a place or site that lists all of the new available fixtures that aren't listed in the ScanLibrary or do we have to annoy you tech guys everytime we buy a new unlisted light?

Secondly, if the latter is the case, could I have a profile for;
Equinox Vixen laser http://prolight.co.uk/DJ/item.php?id=509260
Acme Cougar Pack http://prolight.co.uk/DJ/item.php?id=509056


My thanks for your help
Mark

(PS, I am using the older myDMX not the new 2.0)

I'm sorry, these links aren't to the manuals as you stated in on of your threads (told you I was new)
the Vixen should be http://prolight.co.uk/images//...QLA36/EQLA36-um0.pdf
the Cougar should be http://prolight.co.uk/images//...OUG01/COUG01-um0.pdf

Apologiise

Mark

have you looked on this scan library? if its not in there, i will be happy to build it for you please let me know

https://www.dropbox.com/sh/3y70mz48yuyhaf0/whFIoQiDu0