Profile Request

What problems are you having exactly?
Here is the Scan LED 300 in 8 ch: http://db.tt/9fHwotU2
And 11ch: http://db.tt/3l15aKml

Thanks Jingles,

With the original profiles, a couple colors were empty. Specifically, red did not show up. I know split colors aren't supported, but this was solid red. When you gave me the .ssl profile versus .ssl2(I think is what you called it), I couldn't get the red to show up.

One more favor please. Today I purchased 2 Chauvet Intimidator Spot 350 LED Moving Heads. Would you be so kind as to make me a profile for them. It should be the last for a while because now I'm broke.

Thanks for everything. You're a life saver!!

Which profiles didn't have the right color?
Also since my dmx uses only .ssl forget whatever I said about .ssl2. .ssl2 won't work with my dmx. But if you are editing any profiles in the scan library editor and when you go to save you see a option for .ssl2 don't use it. I think that is all I had said about it.
I don't have a profile made for the 350 yet. Please send me a link to the PDF and let me know what channel mode you want and I can make it for you.
Sincerely,

LOL ... I hear ya. You had accidentally sent me a couple profiles in .ssl2 and you helped me figure out what was wrong and then sent me the correct .ssl profiles for my Q-Spots.

I'll look up the specs on the 350 and forward them to you.

Hi Jingles,

Hi tried to email you the manual for the Intimidator Spot 350 LED, but your site rejected the email. You can find it at this link:

http://www.chauvetlighting.com...D350_UM_Rev02_WO.pdf

Thanks!!

I got your email with the link to the manual. I didn't have time to make it yet. When do you need it by? I can make it for you by the end of the weekend. Let me know.
Sincerely,

Hi,

Can you advbise if there are any profiles for the new showtec led range of moving heads. If not would it be possible to make a fixture profile.

I require a fixture profile for the following lights:-

Showtec Phantom 25 LED spot

Showtech Phantom LED wash

Showtec Phantom 50 LED spot

details and the pdf manual of the 25 led spot are here:-

showtec phantom 25 led spot

showtech phantom 25 led wash

showtec phantom 50 led spot

There are full manuals on the site that give full details of the dmx channels for the above fixtures. Can be found under the document download tab on each of the above links.

Thank you in advance.

Get it to me when you can Jingles. The end of the weekend is fine, but I'll take it sooner if you get it.

By the way, note the post by Lightup tagged into this string.

Thanks!!

Sure I will do my best.

Post tagged by lightup what? I'm not following you.
Sincerely,

Someone named Lightup posted in my string requesting some profiles. I didn't know if you would notice it since it's in the middle of mine.

oh. ya I got his profiles coming.
Thanks.
Sincerely,

FYI ... I am stuck all day Saturday at a place that will have me bored to tears. If there is any way you can get that profile to me Friday, I will be able to have 8 hours of uninterrupted programing time on Saturday on the 3D Visualizer. Crossing My Fingers

hmm somebody else asked for these same profiles too. Take a look at this thread. They are all done.
http://forums.americandj.com/e...110033546#2110033546
Let me know if you have anymore questions.
sorry for the delay.
Sincerely,

But what about the Chauvet Intimidator Spot 350 LED profile?

Lightup tagged on to my thread and you must have missed mine. I was hoping to program my new rig tomorrow during the day. I'll be stuck all day and it's the perfect time for me to get this done.

Ahh i'll make it tonight. you will have it by morning. Cool? sorry. This is kinda the reason why me and the mods are going back to the profile request thread as located here.
http://forums.americandj.com/e...0045516/m/7110062546
so all future request will ONLY be honored if they are in the proper month thread. Well maybe outside of the thread too. depends on my mood.
Sincerely,

8 channel mode: http://db.tt/8zOsZhWa
14 channel mode: http://db.tt/T8lQw6CT
Sorry for the delay.
Sincerely,

You're awesome...Thanks so much!!

no problem. you are welcome. Be sure to post some pictures of your set up.
Sincerely,

Will do :-)