can someone help me get a profile for CASA Laser, 4color- RGPY that works with MyDMX.
Thanks in advance for your help
Original Post
Replies sorted oldest to newest
Hi welcome to the forums.
Sorry but if you do not have a DMX chart I really can't make a profile. Feel free to browse my dropbox and download and test any laser profile that sounds close.
https://www.dropbox.com/sh/ljd4mhbtrqfwwhf/_U8hUGhXA2
Sincerely,
Sorry but if you do not have a DMX chart I really can't make a profile. Feel free to browse my dropbox and download and test any laser profile that sounds close.
https://www.dropbox.com/sh/ljd4mhbtrqfwwhf/_U8hUGhXA2
Sincerely,
Here with the Control Parameter Chart Please:
Channel - function - Value = Description
Ch1 -Mode Value 0~49 = Close, Laser OFF
50~99 = Sound active mode
100~149 = Auto mode
150~199 = static patterns of DMX mode
200~255 = Dynamic patterns of DMX mode
CH2 - Pattern Selection 0-255 = 52static/dynamic pattern
CH3 - Position-X - 0~255 = Adjust position X
CH4 - Position Y - 0~255 = Adjust position Y
CH5 - Scanning Speed - 0~255 = 0 is speedy, 255 is slow
CH6 - Dynamic Patterns play speed - 0~255 = 0 is speedy, 255 is slow, has ten grade speed
CH7 - Static Pattern size - 0~255 = 0 is small, 255 is big
I hope this helps.
the link below will take you to the table on ebay
http://www.ebay.com/itm/RGPY-4...&hash=item43a816243e
Channel - function - Value = Description
Ch1 -Mode Value 0~49 = Close, Laser OFF
50~99 = Sound active mode
100~149 = Auto mode
150~199 = static patterns of DMX mode
200~255 = Dynamic patterns of DMX mode
CH2 - Pattern Selection 0-255 = 52static/dynamic pattern
CH3 - Position-X - 0~255 = Adjust position X
CH4 - Position Y - 0~255 = Adjust position Y
CH5 - Scanning Speed - 0~255 = 0 is speedy, 255 is slow
CH6 - Dynamic Patterns play speed - 0~255 = 0 is speedy, 255 is slow, has ten grade speed
CH7 - Static Pattern size - 0~255 = 0 is small, 255 is big
I hope this helps.
the link below will take you to the table on ebay
http://www.ebay.com/itm/RGPY-4...&hash=item43a816243e
Thanks for the update. I did try to use that but the profile did not work. All other fixtures are working but for the CASA. Any tips
That profile was made trait for trait from the info on the webpage. It should work. double check your dmx settings, address, and make sure the laser is set to the right mode.
It really should work.
Sincerely,
It really should work.
Sincerely,
Hey, did you ever get a resolution for this? I have a magic 260 controller and Elation support created a profile for the CTL-DCM 4 color laser but i have no control over it, only the master fader makes the laser come on and off. I have no other control over it. The DMX address/mode appear to be correct, what else could be going on? Please help....