profile for Stage Ape Cobra

http://db.tt/bJwFgvaz
^ Stage ape drop box folder to browse. I didn't make them. The people there did. but if any issues with a profile I can fix it.

I don't understand your other issue.
Can you re-explain?
Sincerely,

My other issue has to do with an Amonstar 64par light. The sliders don't work correctly with the pre programmed effects. In the profile, the last three sliders are a fade option. Red, Green, and blue fade on fade off. Only one can be used at a time. When I use the programmed effects (like rainbow or night rider) these are the sliders that are used to control the lights. This is wrong because the sliders for each color dimmer are sliders 2-4 with 1 being the master dimmer control. I hope this explains it better. Thanks for the stage ape profile. It worked.

So, you need a profile that has Dimmer, R,G,B control? and in that order?

If you are offering to program a profile for me this is what I would need:

Slider 1-dimmer for sliders 2,3,4
Slider 2-red
Slider 3-green
Slider 4-blue
Slider 5-strobe
Slider 6-color change increase in intensity
Slider 7-color fade increase in intensity
Slider 8-red pulsing
Slider 9-green pulsing
Slider 10-blue pulsing

Thanks for your help

Nate

Hey James,

I just wanted to get back to you and see if you can help me with this LED par can. I saw your instruction video for the profile editor. My conclusion is that the Amonstar par 64 profile has question marks for the color part on sliders 2,3,4. This is why they do not register in the 3d visualizer. How do I change that so I can see what I'm programming? Also there are no presets registered for the channels 2,3,4. I tried messing with this but I can't seem to get it to work.

For LED RGB section make sure you are using the Color mix channel type for RGB. Like in this picture below.

ok?
Sincerely,