Skip to main content

Hi
I have a big request concerning a profile from which I can not cope.
A few days ago I bought a moving head LED 108 / 3W
Could you please help me in making a profile for the mobile head.
Channel Value Functions
1) 0-255 Master dimmer, 0-100%
2) 0-3 No function
4-240 Strobe, from fast to slow
241-255 No function
3) 0-255 Red, 0-100%
4) 0-255 Green, 0-100%
5) 0-255 Blue, 0-100%
6) 0-255 White, 0-100%
7) 0-255 Pan, 0-540°
8) 0-255 Tilt, 0-270°
9) 0-255 Pan fine, 0-1.8°
10) 0-255 Tilt fine, 0-1.8°
11) 0-255 Pan/Tilt speed, from fast to slow
12) 0-9 Enable CH 3, 4, 5 & 6
10-149 Static colors:
10-19: Red;
20-29: Red + Green;
30-39: Green;
40-49: Green + Blue;
50- 59: Blue;
60-69: Blue + White;
70-79: White;
80-89: Red + White;
90-99: Green + White;
100-109: Red + Blue;
110-119: Green + Blue + White;
120-129: Red + Green + Blue;
130-139: Red + Green + Blue + White;
140-149: Red + Green + White
150-179 Color changing, CH13 enabled
180-209 Color strobe, CH 3, 4, 5 & 6 enabled
210-239 Color fading, CH13 enabled
240-255 No function
13) 0-255 Speed of CH 12 related functions (when CH 12 at 150-179 or 210-239)
Original Post

Replies sorted oldest to newest

hi
Sorry, the topic has already put in place.
Had long been trying to make a profile for the moving head, but when you start Visualize 3D can not see the light.
If you can help me thank you very much.
On Saturday, I have a big event and I have everything programmed.
Greetings from the Polish
You will need to DELETE the fixture from your MyDMX Universe and then re-add it using the newer profile you've saved, even it's the same profile that you've adjusted. You'll have to do this each time you make changes to the profile.

I'm not sure if this is a good or bad thing. It is annoying until you have the profile correct.

On the positive side of things, you posted everything needed to make your profile. I just don't have the time to do that. Jingles is usually the go-to guy for profiles.

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×