Problems with VMS4 and Traktor

I think i have worked it out-volume fader for midilog2 seems to act as the master volume, so set midilog 1 and 4 as deck a and b and they should work independantly-however this would render the 4 decks impossible to use would it not though!?

quote:

Originally posted by Richi S:
I think i have worked it out-volume fader for midilog2 seems to act as the master volume, so set midilog 1 and 4 as deck a and b and they should work independantly-however this would render the 4 decks impossible to use would it not though!?

I am going to try this right now, it's been really pushing hard I have almost had enough.

quote:

Originally posted by Richi S:
URGENT HELP NEEDED!
ok so i have the switch on the 4 out setting and all switches on USB rather than analogue. I have deleted all the settings for traktor so i can freshly map the thing and to keep it simple just got play and volume faders mapped for deck A and B. My problem is this, and quite a serious one-press play on deck a and it plays fine, bring fader down and pause. Repeat with deck B, Fine. BUT! Deck B will not come through the output unless the volume fader for A is up, so you have to stop deck A to hear deck B solely-A major problem?!

mapping problem,,try make new

quote:

Originally posted by W.A.R.Z:

quote:

Originally posted by Richi S:
URGENT HELP NEEDED!
ok so i have the switch on the 4 out setting and all switches on USB rather than analogue. I have deleted all the settings for traktor so i can freshly map the thing and to keep it simple just got play and volume faders mapped for deck A and B. My problem is this, and quite a serious one-press play on deck a and it plays fine, bring fader down and pause. Repeat with deck B, Fine. BUT! Deck B will not come through the output unless the volume fader for A is up, so you have to stop deck A to hear deck B solely-A major problem?!

mapping problem,,try make new

It makes me laugh on here no one has come up with any working mappings for this crap mixer yet, not even a two deck mixing set up it's a joke....

So you're saying the VMS4 is crap because nobody can write a decent Traktor map?

Surely that's a Traktor problem.

My VMS4 works fine with VDJ.

is this really a mapping problem? I have mapped it from scratch so deleted everything, just done a simple A and B deck set up and not even mapped the master gain yet(i intended to test it first by changing this with the mouse on screen). So with just the play/pause and A and B deck faders mapped (nothing else) you have to have midilog 2 fader up to control master sound- CAn this be right?! losing patience.

quote:

Originally posted by GroovinDJ:
So you're saying the VMS4 is crap because nobody can write a decent Traktor map?

Surely that's a Traktor problem.

My VMS4 works fine with VDJ.

I didn't mean you/us I meant American Audio, I had mine hooked up to VDJ and had nothing but problems since I have switched to Traktor Pro I have two problems: The cue buttons don't work properly, so I can't mix which is the whole point isn't it, I am glad yours is working so well for you.

I had 10/15 faults when I was hooked up to VDJ Pro edition, look this isn't getting anywhere is it, your right I shouldn't say anything should I just keep quite..

However the tsi file mapping has about for faults in it (the one on the AA Website. I am trying with limted time and knowledge to fix it myself, but as AA Kindly put up a tsi file I thought it would be good to ask them. The fault is mine though as if I did more research I could have brought a Traktor supported system like the Numark Mix Deck.! I won't make the same mistake again though but will have to save up 4/5 moths to buy another system..

Does that make sense now!

quote:

Originally posted by Richi S:
is this really a mapping problem? I have mapped it from scratch so deleted everything, just done a simple A and B deck set up and not even mapped the master gain yet(i intended to test it first by changing this with the mouse on screen). So with just the play/pause and A and B deck faders mapped (nothing else) you have to have midilog 2 fader up to control master sound- CAn this be right?! losing patience.

This is the same problem I have, it would be nice if someone from AA Said this is because it's midlog a = etc etc

That's all I am asking for not for anybody to fix it just a bit of help, not much to ask is it!

hey i'm new one here...

i try a lot of map for taktor and for at this time the best you can find is kali map (sorry i not have the link again) but you can find it on this site

if someone have a best map don't hesiate share it ^^

sorry for my english i'm a french dj ...