problem w/American DJ dynasty dmx lights...

Former Member

I'm using the 3dvisualizer and the Fx feature to setup some simple scenes and all appears fine. When I connect my lights there are delays in the lights when following the simple patterns of the Fx feature. I say simple because even when it does a simple circle there is some type of delay in the lights following the circle. fyi: I've grouped 16 of these lights together with 2 channels (for 2 different colors).

5/26/0810:39 AM

❤️ 0

Original Post

Replies sorted oldest to newest

JinglesForum Admin

a delay where? On the 3d? There is a default pan and tilt speed in the 3d viz. Open up the construction mode open the folder for those lights and you will see a 2 sec and 1 sec boxes make those 0. That should work. Let me know. Also 16??? Wow! LOL sincerely,

5/26/0811:14 AM

❤️ 0

JinglesForum Admin

Also explain ,"I've grouped 16 of these lights together with 2 channels (for 2 different colors)??

5/26/0811:55 AM

❤️ 0

Former Member

well since I've grouped all the lights into pairs and I want all the pairs to have the same colors I really only need 2 addresses...each pair is assigned address 1 & 7.

5/26/0812:54 PM

❤️ 0

JinglesForum Admin

oh ok I see. Did that work with the default times?

5/26/081:07 PM

❤️ 0

Former Member

well I see the affect that it has on the overall speed of the lights panning and tilting. I haven't tried it live on the lights yet, but to better define the problem is a random stall on the path of the circle...a couple of seconds and then it will resume. I'll resond later tonight if this fix the problem.

5/26/081:48 PM

❤️ 0

JinglesForum Admin

the times in the 3D will only affect the lights in the viewer not in the actual fixtures them selves.

5/26/082:17 PM

❤️ 0

Former Member

ok...well i wonder what would cause this delay?

5/26/082:24 PM

❤️ 0

Former Member

I am getting the same problem. Mine is worse though. Not just a delay , but total loss of control.