Skip to main content

Replies sorted oldest to newest

Are you using a USB hub or anything? Powered or not powered? If your mac only has usb c, try a usb-c to usb-c cable.
Last ditch effort i can give you in forced bootloader mode, but if the USB port is not detecting it tight, it might not work.
to force bootloader mode, turn on hardware manager with the device unplugged to the computer, but a cable plugged into the GO hardware, then Press and hold the "D" button on the device as you plug it into the computer, and hold it for a few seconds but not super long, it should detect right away and be in "BL" mode. See screenshots attached.GO BL 1GO BL 2If it works try upgrading the firmware or re-writing it and then see if your wifi settings can be adjusted.

Attachments

Images (2)
  • GO BL 1
  • GO BL 2

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×