Hello everyone, you will forgive my English (I use a translator). I have been using mydmx 3.0 for a long time and have always had a problem. For each motorized I always use two groups of scenes ("position" and "color" scenes). Logically, in color scenes, the pan and tilt controls are always set to OFF. Now, if I reverse the pan or tilt of the motorized (from the patch screen), the pan and tilt controls of the "COLOR SCENES" (which were OFF for obvious reasons) are activated (ON) interfering with the position scenes. to solve it I have to select the color scenes (one by one) and return the pan and tilt commands to OFF .... all this happens on different computers (MAC and PC) and with any fixture. I would be very grateful if you could help me.Original Post
