Skip to main content

Replies sorted oldest to newest

dj sound, you were doing more then makin a suggestion, you were trying to enforce the rules of the forum, you might think your helping, but in reality, your not. your just a member here. its our job as mods to enforce the rules and let people know about them, over the past couple weeks you have been realy eager to let people know when they are braking the rules, please let us handle that seeing that it is our job.


thanks

josh
Be careful with any of those "Micro-plex, Multi-plex, LMX" dimmers and DMX Controllers. All the manufacturers that make them put +15volts on pin 3 of the XLR connector to phantom power the console. Thats fine when you have a console that outputs that protocol, but if you plug it into a DMX board, it will fry your RS485 Transceiver. I had a client that fried all 4 DMX outputs of a controller that he had. Also, the ND-4600 cannot be upgraded to receive DMX, and a new DMX Dimmer pack would be cheeper than a converter. Just so you all know.

Paul DeRocher
Technical Service Manager
ALPS/Advanced Lighting

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×