October profile request thread.

JinglesForum Admin

Welcome to the October 2010 Profile Request thread. Please keep on-topic.

A few reminder rules:

1: When making a request, please state the make and model of the fixture.

2: Please post a link to the manual or a photo of the DMX traits or post the DMX traits. Please, English versions preferred.

3: If posting traits, please be as complete as possible.

4: Please be patient. It's best to make sure you're not under a deadline, like "I need it in 2 hours" for example. Please allow a bit of time. A couple of days is reasonable.

5: Please check the updated scan library link on the my dmx product page for your fixtures before requesting profiles. Or join my shared drop box folder. http://db.tt/6q9QkL The link for profiles on the my dmx product page can be found at the bottom of every one of my post.

Also let me add that if someone else get's their profile before you but you posted your request before them please do not be offended as some profiles take more time than others
Thanks and have fun.

10/1/101:09 AM

❤️ 0

Original Post

Replies sorted oldest to newest

Former Member

Hi,

I'm just wondering if it would be possible to get a profile for the Acme iMove 5s? I can't see them in the current profile listing.

Cheers.
Daniel.

10/11/102:12 PM

❤️ 0

JinglesForum Admin

I'll need a link to the product page or a manual.
Thanks.

10/11/102:30 PM

❤️ 0

Former Member

Almost stumped me with that one...

http://www.electronique-diffus...ces/solbele4-044.pdf

Hope that helps you, and thank you very much!

10/11/102:51 PM

❤️ 0

Former Member

James can you help me out with the Blizzard Puck?

You can find the manual here

10/11/106:20 PM

❤️ 0

JinglesForum Admin

Sure no problem. Give me till end of the day tomm.
Sincerely,

10/11/106:29 PM

❤️ 0

JinglesForum Admin

Bodz here you go: http://db.tt/ckZbDel

Stevie, I'm making yours next.

10/12/101:01 PM

❤️ 0

JinglesForum Admin

Stevie, here is the Puck LED 6 ch. The manual did not mention any specific traits just channel layout. So if it doesn't work properly let me know.
http://db.tt/bv54YGe

10/12/102:44 PM

❤️ 0

Former Member

Thankyou very much James.

10/12/105:00 PM

❤️ 0

Former Member

Works perfect, have them publish it on the myDMX site. I will get you more of Blizzards stuff. Their lighting is becoming popular for mobiles.

10/12/106:02 PM

❤️ 0

Former Member

Just bought mydmx software for a independant pro wrestling company that I am a part owner in & I need a profile built for the Omnisistem Pyrofog DF-V6 DMX Fog Machine.

The owners manuel can be located at http://www.omnisistem.com/pdf/OS-DF-v6.pdf

I hope that this info is all that is needed. PLease let me know if anything else is.

Thank you in advance & it is greatly appreciated.

10/14/108:11 PM

❤️ 0

Former Member

JC welcome to the forums. What promotion are you a part of?

10/14/109:28 PM

❤️ 0

JinglesForum Admin

Pyro Fog: http://db.tt/73KZ7IR

Welcome to the forums. Anyone going to LDI? I'll be there.
Sincerely,

10/14/1011:08 PM

❤️ 0

Former Member

Thank you for the file! Greatly appreciated!

I'm part owner of UnderGround Wrestling. We are located in Illinois & ran from August of 2008- June 2009 before a crooked former business partner made me leave and changed the name to something else. It took me and another awesome bix partner to get out stuff together and start up again. You can see some of the matches at www.youtube.com/ugwrelived.

Thanks again!

10/16/107:01 PM

❤️ 0

Former Member

i was wondering if you could make a profile for the eliminator lighting electro 196 ll here is the link to the manuel

http://www.eliminatorlighting....s/electro_196_ii.pdf

Thank you for all that you do!

10/21/106:38 AM

❤️ 0

Former Member

Having great difficulty trying to make this profile work with no success
If You could make one for me that would be great
here's the manual
http://www.visualeffectsinc.co...anuals/lynxv150.html

thanks
Tim

10/22/1012:03 AM

❤️ 0

JinglesForum Admin

DJ dan here you go. http://db.tt/ldaETEB

RifRaff. I'll have to make your profile sometime this weekend or on Monday when i get back into my office from LDI in Vegas. I apologize for the delay.
Sincerely,

10/22/108:00 PM

❤️ 0

Former Member

Thanks Jingles
No rush please take your time

10/23/1012:05 PM

❤️ 0

Former Member

Hi, need a profile for the Chauvet 4play. I have had a look for it but I can't find it. Can you help?
http://www.chauvetlighting.com...manuals/4PLAY_UM.pdf

Thanks
Kelly

10/24/1011:12 AM

❤️ 0

Former Member

quote:
Originally posted by Jingles:
DJ dan here you go. http://db.tt/ldaETEB

RifRaff. I'll have to make your profile sometime this weekend or on Monday when i get back into my office from LDI in Vegas. I apologize for the delay.
Sincerely,

No need for this one. I figured it out and all is working great.
Thanks anyway Jingles
Tim

10/24/108:56 PM

❤️ 0

JinglesForum Admin

Good. I'm glad you got it.
Sincerely,

10/24/1010:45 PM

❤️ 0

Former Member

Hi,

I'm looking for a profile for the HTL Par64 LED.

Here is a link to the product:
http://www.theprohtl.com/ShowP...ct.asp?To=Show&ID=28

Here is a link to the manual:
http://www.bethelcarlisle.com/HTLPar64LEDManual.pdf

Thanks for any help.

Lee

10/26/104:02 PM

❤️ 0

JinglesForum Admin

Here you go.
http://db.tt/oa322fq
Just a note. channel 1 apparently does nothing according to the traits. Welcome to the forums
Sincerely,

10/26/104:18 PM

❤️ 0

Former Member

Thank you!

10/26/104:58 PM

❤️ 0

Former Member

Not sure if it's been created yet or not, but can you help me with the Chauvet Slimpar 56? They have a 3 channel and 7 channel DMX mode.

Additionally, the Chauvet QSpot 260

Thanks

10/27/108:01 AM

❤️ 0

Former Member

The Q-spot 260 is available at http://www.americandj.com/Prod...Category=DMXSoftware You can dl the Chauvet profiles. It is in there. I am not sure of Jingles made a profile for the slim pars yet.

Jingles you need to get Scott to add all of the profiles you made to the big profile packages, so they are easier to find.

10/27/108:33 AM

❤️ 0

JinglesForum Admin

7 ch mode: http://db.tt/4gPURde
3 ch mode: http://db.tt/90RVb8X

Stevie, Scott is far to busy of a person to upload profiles the web servers. We have our web guys do it. And I use drop box and update profiles daily. All new profiles go into their respective company folders. So if the customer knows the name and the brand it should be fairly simple to find.
Sincerely,

10/27/1010:45 AM

❤️ 0

Former Member

The profiles show they haven't been updated for 5 months. I know you wrote many profiles in the last 5 months.

10/27/1011:14 AM

❤️ 0

JinglesForum Admin

Yup I have and they have all gone to dropbox. There is a drop box sticky thread in the my dmx section.
Sincerely,

10/27/1011:23 AM

❤️ 0

Former Member

Hi Jingles,

I've bought a Botex DDP-405, can you make me a library file?
Here is my Instruction manual: http://www.speedyshare.com/fil...106/botex_DDP405.zip

Thanks a lot!!!
Grtzzzz

10/31/109:45 AM

❤️ 0

JinglesForum Admin

I'm sorry but I do not make profiles for dimmer/switch packs. There is no need. You can use the par 36,56 or 64 profiles found in the _generic folder. Let me know if you have any questions.
Welcome to the forums.
Sincerely,

10/31/101:57 PM

❤️ 0

Former Member

Hi Jingles,
I know you've created one last month but I can't seem to find a certain profile in your drop box...

Casa CTL-BM?

11/1/102:32 AM

❤️ 0

JinglesForum Admin

All i have is a casa 9 ch laser. Is this it?

http://db.tt/veHYFyl
Let me know so i can close this thread.
Sincerely,

11/1/1011:39 AM

❤️ 0

Former Member

Ok, thanks! I'll try that one!

I finally found my instruction manual of my Aztek venus 100mw laser green:
http://www.speedyshare.com/fil...78956/aztekvenus.zip

Can you please make me the library file Jingles?
Thanks a lot!!
Greetzzz

11/1/101:14 PM

❤️ 0

Former Member

quote:
Originally posted by Jingles:
All i have is a casa 9 ch laser. Is this it?

http://db.tt/veHYFyl
Let me know so i can close this thread.
Sincerely,

Thank You.

11/1/101:22 PM

❤️ 0

JinglesForum Admin

MSN is it a 10 channel laser? Because it looks like the 2nd picture cuts off some traits. Let me know.
Sincerely,

11/1/102:16 PM

❤️ 0

Former Member

quote:
Originally posted by Jingles:
MSN is it a 10 channel laser? Because it looks like the 2nd picture cuts off some traits. Let me know.
Sincerely,

Yes, it's a 10 channel laser, the parameters are in file 1.jpg

Greetzzz

11/2/103:26 AM

❤️ 0

JinglesForum Admin

OK. Laser traits always irritate me. I never have the proper icons to best translate the action the fixture is taking. In all honesty your best bet is to use a blank 10 channel profile. lol. I'll try to make this today.
Sincerely,

11/2/1011:43 AM

❤️ 0

Former Member

Héhé, that would be great!

this is a image of the laser if you need one: http://t1.gstatic.com/images?q...if%26w%3D80%26h%3D68

Good luck and a BIG thanks in advance!!!

11/2/1011:50 AM

❤️ 0

JinglesForum Admin

That is one small picture. lol. Your welcome in advance.

Sincerely,

11/2/1012:07 PM

❤️ 0

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...