Skip to main content

Brand new today to mydmxgo and dmx altogether. I got the wifi connect to my tablet, lights powered and hooked up. I loaded 1 LT QUAD BT, 1 Intimidator 160, 1 swarm Wash. and 1 Colorband Pix M profile. I have 2 of each light. Do I need 2 profiles each? Reason for asking is that I'm having no luck getting a master slave set up for each of the 4 pairs of lights. Thanks. Shep

Original Post

Replies sorted oldest to newest

Yes on don't load 2 sets of profiles. I have all set to dmx. All respond on the decks. But the mirroring of movement  is not working on the intimidators. And if one fools the other how is it possible to get the two to meet their beams center stage? If there is a definitive site to learn these aspects of mydmxgo and my lights, please advise. Thanks much for chiming in on my behalf.

@shep posted:

Yes on don't load 2 sets of profiles. I have all set to dmx. All respond on the decks. But the mirroring of movement  is not working on the intimidators. And if one fools the other how is it possible to get the two to meet their beams center stage? If there is a definitive site to learn these aspects of mydmxgo and my lights, please advise. Thanks much for chiming in on my behalf.

You have options:
1) Assign each fixture a unique DMX address but adjust the zone for the second light to be inverted of the first one in My DMX Go. You can drag the box for the zone so it's completely opposite of what it was.
2) Give both fixtures the same DMX address and then invert the pan on one of the fixtures in the light's menu. Both lights will always be doing the same thing but one will have inverted movement, so they will mirror each other.

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×