No Joke: April 2010 Profile Request Thread

Guest

Welcome to the April 2010 Profile Request thread. Please keep on-topic.

A few reminder rules:

1: When making a request, please state the make and model of the fixture.

2: Please post a link to the manual or a photo of the DMX traits or post the DMX traits. Please, English versions prefered.

3: If posting traits, please be as complete as possible.

4: Please be patient. It's best to make sure you're not under a deadline, like "I need it in 2 hours" for example. Please allow a bit of time. A couple of days is reasonable.

5: Please check the updated scan library link on the my dmx product page for your fixtures before requesting profiles. The link can be found at the bottom of every one of jingles post.

Thanks and have fun.

4/1/103:21 PM

❤️ 0

Original Post

Replies sorted oldest to newest

JinglesForum Admin

Thanks Chris. i changed marchn to April. figured maybe your still a little woozy from being sick. Take care.
Sincerely,

4/1/103:29 PM

❤️ 0

Studio42 (Guest)

Copy/pasted and fighting a crappy internet connection, in between coughing up gobs of green crap.

On the plus side, my truck is almost done being repaired. I also at this point in time don't need any ADJ or Elation profiles. Everything I want or need or will buy soon already has a profile available.

4/1/103:52 PM

❤️ 0

JinglesForum Admin

Well hope you are back to 100% soon. Glad to hear you don't need any profiles.

when your internet is not crap check out my latest post in the just for jingles thread.

Sincerely,

4/1/104:01 PM

❤️ 0

Former Member

Could you create a Profile for the New American DJ Fusion FX TRI Bar I am sure you have access to it but here is the link to the Manual http://www.americandj.com/pdff...usion_tri_fx_bar.pdf

Thanks
Fred

4/6/101:17 PM

❤️ 0

Former Member

Could you creat a profile for the Chauvet ColorStrip Mini. A link to the manual is attached. Thanks

http://www.chauvetlighting.com...ip_Mini_Rev02_UM.pdf

4/10/107:57 PM

❤️ 0

JinglesForum Admin

I do have this profile already made. However I am not by my work PC. I will email this to you asap.
Sincerely,

4/10/108:32 PM

❤️ 0

Former Member

Thanks. Which one do you have already. The ADJ Fusion Bar or the Chauvet Color Strip Mini?

4/12/105:41 PM

❤️ 0

Former Member

Hi Chris i have overcome all my midi triggering problems everything works fine. now all i need is a stairville led 64 fixture (7channels) i can e-mail you the manual for this fixture if you want: Thanks for all your help

4/13/1012:25 AM

❤️ 0

Studio42 (Guest)

Post a link to the manual here and Jingles will get to it when time permits for him.

I'd start making fixture profiles myself, but I'm rather involved in other projects. Besides, I'm an audio engineer, not a lighting guy(believe it or not).

Good to hear your MIDI issues are resolved. Always good to hear when one of the users here are working as they want to be again.

4/13/1012:30 AM

❤️ 0

JinglesForum Admin

Fred I believe I have both made. You should have these within the next 14 hours.

Sincerely,

4/13/101:11 AM

❤️ 0

JinglesForum Admin

Well I just sent them now Fred. Let me know when you get them by either replying to my email or replying here.
FYI for all the Color-strip mini owners that use my DMX. The mini has the SAME exact DMX traits as the original Color strip. So the profile that already exists can still be used.
Sincerely,

4/13/101:20 AM

❤️ 0

Former Member

Hi,
Can I get a profile made for a chauvet qspot 260 moving head.
here is the manual http://www.chauvetlighting.com...-Spot_260-LED_UM.pdf

4/20/104:39 PM

❤️ 0

JinglesForum Admin

I will make this profile within 48 hours. I also received your email. Yes i use the profile creator. And the way you set it up in the creator is how it reflects properly in the 3D.
Sincerely,

4/20/104:54 PM

❤️ 0

JinglesForum Admin

skip your profile was mailed to you just a minute ago. take a look in your inbox.
Sincerely,

4/23/103:07 PM

❤️ 0

Former Member

Hi, can I get a profile for the Pulse ECO LED Par 56 please.

I can't find an online manual. I have a paper version. What are the traits and what info do you need?

Thanks

Roger T

4/28/1011:38 AM

❤️ 0

JinglesForum Admin

you can just type them up if you wish on here. The traits look like this. (sample pic)