Need fixtures!

Former Member

Hi James, it's me Hollywood again, the flash rope guy,I still haven't used my interface yet but getting ready to.I just purchased 2 Chauvet Intimidator 2.0 moving head lights, I tried to create a fixture in the fixture creator and I don't really know what to do, I'm not sure how to figure out preset levels, first, last, default, which icons to use, and I can't get the beam angles to go in halfs like.5! Also purchased 8 Colorkey led Par 64's and can't find an led par to use in the menu, Can you help me out ! Thanks Hollywood

3/17/095:14 PM

❤️ 0

Original Post

Replies sorted oldest to newest

JinglesForum Admin

Hollywood wassup? good your about to use it. there should be a profile for the spot 2.0's ill double check that for you. If we don't have it i can make it. Or send me what you have and I'll modify it. Send me the traits for the LED par 64's and i can make those aswell. maybe ill try to make a screen movie and upload it. i DO have a video on you tube on how to properly make your own fixture profiles. video is located HERE.
Also the beam angles do not as of yet go to .5 degrees. so either round up or down. its really not that large of a margin so the 3D will still be accurate enough. Let me know.
Sincerely,

3/17/095:25 PM

❤️ 0

Former Member

Hi. I too need a fixture for the ColorKey LED PAR 64 (1 Watt). They are 6 channel LED Pars. Ch 1 is red, ch 2 is green, ch 3 is blue, ch 4 is color mixing, ch 5 is strobe, ch 6 is color fading. Thnx

3/27/0911:53 AM

❤️ 0

Skip to main content

Add Reply

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...