Need a profile for a Chauvet fixture.

Former Member

I need the profile for MyDMX for a Chauvet fixture. I am new to the forum but I have been looking around for the profile .ssl files for this product. I did read the posts on how to get the 3D to work and not using a Dimmer profile, however I would still like to have the profile.

The fixture is the Chauvet DMX-4 Dimmer/Relay Pack
http://www.chauvetlighting.com...manuals/DMX-4_UG.pdf

6/29/122:11 PM

❤️ 0

Original Post

Replies sorted oldest to newest

JinglesForum Admin

Are you using dimmer mode or relay mode?
I can make this for you. It will literally take me 2 minutes to make a 4 channel dimmer/relay profile.
Let me know and welcome to the forums.
Sincerely,

6/29/122:19 PM

❤️ 0

Former Member

Thanks for the quick response Jingles. I am using them in Dimmer mode but I do have a few fixtures that I need only an on/off for. Can they be used for both?

6/30/121:00 PM

❤️ 0

JinglesForum Admin

So do you want a profile for dimming mode nad a profile for on/off mode? You got to let me know I can't make a single profile that does both for all four channels. This is why we say it is easier to just use the generic par 36,56, or 64 or even the single channel generic profile.
Sincerely,

7/1/1211:52 PM

❤️ 0

Former Member

Please build a profile for a dimmer pack. Thanks.

7/2/1210:43 AM

❤️ 0

Former Member

OK... A profile for a dimmer and a profile for a switch would be great. Thanks.

7/3/122:51 PM

❤️ 0

JinglesForum Admin

Here you go, Sorry for the delay.
https://www.dropbox.com/s/o3i2...%20dimmer%20pack.ssl
https://www.dropbox.com/s/wi6x...%20switch%20pack.ssl
Sincerely,