NEE HELP adding showtec par 56 short eco

Macky said he would help you with this in this thread.
http://forums.americandj.com/e...030058546#4030058546
Did you want the profile today?

yes please but would also like help on creating the modes on the actual fixture

thanks

Hi, here is the profile for you.
http://db.tt/uGarNBu5
The modes are a part of channel 6. and the RGB control means that the output of the LED par can will be controlled by faders 1, 2, and 3. the 7 color fade means that the fixture will fade through 7 different colors giving the appearance of doing a "rainbow" most likely. The 7 color change will be the same 7 colors from the fade one but they will just snap from color to color with no fade. the last one is sound active, where the colors will change according to the music the internal microphone on the fixture is hearing.
BUT you should notice that unless channel 6 is on the RGB control mode 1 preset that you will not be able to control the color of the unit unless the channel 6 is on 0-63.
Make sense?
Sincerely,

thankyou very much its made it a bit clearer now very much appreciated.

You're welcome.
Sincerely,

thankyou again also another quick question i have some LED strip and the controller is a box with a remote control if i got a DMX decoder for LED strip would this work to control them too as it is not intelligent light it just has 3 channels so to speak RGB but the actual controller has strobe etc but i know its not on the lights itself as the lights dont have a processor.

thanks ben

Does this box have a DMX input and output? If not it would be really difficult for you to add a DMX chip and all that and then know what is doing what. but hey if you wanna try it and you can tell me what the channel values do and how many channels, sure I'll give writing a profile for you a shot.
Sincerely,