Magic260

Former Member

I have just purchased a magic260 and want to add profiles for the chauvet colorpalette can I do this with the u-link hooked to my computer and if yes what site should I visit for this to happen, I notice that there are other lighting manafactures already loaded but am having no luck using alike fixtures example ADJ led meaga pnl to make mine work properly it works great on my DMX Operator Pro. What Up Thanks

4/29/092:19 PM

❤️ 0

Original Post

Replies sorted oldest to newest

JinglesForum Admin

It's not web based. it is software based. Did you install the software disc that came with the magic?
Sincerely,

4/29/093:01 PM

❤️ 0

Former Member

Hey Jingles, I bought this as a refrubish unit from you guys thru dealmonger so the software was already loaded, but as I stated it had other vendors other than Elation and ADJ on it, could I get a copy of that software disk just in case some profiles are missing? Thanks for your reply, Gary

4/29/095:40 PM

❤️ 0

Former Member

Gary1, you should be able to grab what you need from the Magic 260 page, found here. If you need new profiles, I am sure jingles can point you in the right direction (better this time jingles?

)