Intimidator Scan Led 200

Former Member

Hi is it possible to reverse the Tilt on the above lights profile? To explain. In the Setup tab of Mydmx the slider for this channel works in the oppiste way so if I slide it up the tilt goes down and if I slide it down the tilt goes up.

I have tried the "invert X or Y" check boxes and looked at the profile in Scanlibary but this does not seem to allow me to change anything.

I know it's a very minor issue and if there is no easy answer I can live with it as it is but it is just bugging me !!

Thanks guys

5/10/121:57 PM

❤️ 0

Original Post

Replies sorted oldest to newest

JinglesForum Admin

This means that you have it inverted on the actual fixture in the fixture menu. This isn't the program doing it. It is the fixture. But inverting the pan on the my dmx program in "list" view in the set up tab should revert it back to fader move up is up on the mirror.
Sincerely,

5/10/122:09 PM

❤️ 0

Former Member

Hi James thanks for the reply I did in fact invert it on the fixture menu in error (I thought I was on anoher set of lights!) Sorry for not checking this first before posting !

5/10/123:11 PM

❤️ 0

Former Member

oops hold that reply...!!

Ok I have the light phyisically connected and the actual beam (tilt) is pointing upwards. The tilt channel on mydmx is #2 and it is set at 0. No check boxes are checked on either the setup tab or in the fixture list of the 3d

So if I move the slider up the light beam goes down it is this I would like to reverse - does that makes sense?

5/10/123:21 PM

❤️ 0

Former Member

just to add in the 3d without the tilt invert check box checked - it does what I want it to do . slider up - beam up , slider down beam down

5/10/123:24 PM

❤️ 0

JinglesForum Admin

Sooooo.......it's natural DMX value 0 position for the scanners is UP rather than down?
Ya. Invert it in my dmx only in the list view on the user tab and see if that fixes it..... silly chauvet....

Sincerely,

5/10/123:53 PM

❤️ 0

Former Member

Exactly !! and yes silly Chauvet !! The invert on list view does not seem to make a difference is there a way to reverse the channel in the profile using scanlibrary - although I thinking not !

5/10/127:04 PM

❤️ 0

JinglesForum Admin

No sorry there is no way for me to invert the tilt or pan in the editor.

5/10/127:16 PM

❤️ 0

Former Member

No worries thanks anyway James

5/11/125:54 AM

❤️ 0