Skip to main content

So I have 4 brand new inno spot's and 4 inno scans all running through freestyler sound to light ... Not ideal but its a nightclub installation that the DJ's very rarely Interact with - other than the strobe macro.

The issue I have after testing the rig is that after running S2L for approx half an hour, I deactivate the S2L and request the heads to move to their hoe position (DMX pan127/tilt 127).

On the heads moving to the hone position I sometimes find that a couple of heads seem to think their home position on the pan to be around the 140/114 position (which ever way you look at it)

On checking the DMX output it shows that it has sent the position of 127, but the units are askew.

There are a few other fixtures on the rig (smoke machine, robe 150xt) and the cables have been custom made for the rig. The is A 120 ohm DMX terminator at the end of the rig, and as far as I'm aware all other units home correctly.

Any ideas guys, as this as you can imagine ruins the sync of the rig Frowner

Hes e rig in action - http://www.youtube.com/watch?v=S5SL-t7geyk
Original Post

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×