Skip to main content

Hello Ronnie, it sounds like you may have the light in either slave mode or set to blackout. I will want you to check a few settings to see if either or both are set that way.

If you can go through the display and press the menu button until you see SLNd, press enter and make sure it reads MASt. If it does not then press up or down until it displays that setting and press enter to confirm.

If the unit still read Adj then the second setting you will need to check is LoSt, you will need to use the menu button until you see that setting. Once there press enter and it will need to read Shnd, if it does not press up and down until it reads that setting  and press enter. 

Please let me know if that resolves the issue.

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×