i have 2  brand new hydro beam x1 fixtures... I have no lamp on for either fixture via dmx control or manual control through the fixtures menu... ive tried 2 different dmx controllers and I have control to all  features. Not sure if I could’ve blown both bulbs when powering up brand new out of box or how.

Anyone else have this issue?

Original Post

Hello,

Have you tried adjusting the special functions channel in DMX Mode? On both 11 and 14 channel modes it will be the last channel for both, set the DMX value to 130 leave the value there for about 5 seconds then set the value back down to 0.

Add Reply

Likes (0)
×
×
×
×