how to copy (and reverse) a scene on OPII?

Mount the fixture upsidedown...j/k lol

I'm not sure. I don't have an Operator II, but I'm sure someone will chime in and help you out.

I've got an opII and it is great (imho) but as for setting sweeping motions with lights crossing. remember are you trying to use ALL the scanners at once? Try setting the placements of your lights (gobos & colors too!) then turn off the scanners you don't want to change and place those. Now record the setting (whatever scene & bank you want) now reset the lights to the opposite places. Basically, move the ones on left to the right turn off those and activate the other scanners then place then and record this setting (whatever scene & bank) And there you have it! Remeber the controller ONLY records position, Color, Gobo, Laser & shutter. the result you see is the controller moving the lights to their respective recorded placements.

Hope that helps.

forgive me but the previous post was for getting scanners to reverse. Copying a scene is covered in the manual (downloadable from the website here at ADJ).

To reverse pan and or tilt you go into program mode. then press BOTH the fine and mode buttons until the Reverse LED lights up. use the Bank buttons to select either pan or tilt. THEN press the scanner you want to reverse THEN while pressing and holding the mode switch press the Scene button above the corresponding channel for Tilt or pan. repeat for all the scanners. If this is confusing just call 800 322 6337 ask for service and we will talk you through it.