Skip to main content

Replies sorted oldest to newest

I did connect the wifly transceiver to the go and I still can’t control my wash bars. I was also trying to find the wash bars under the fixtures tab and they are not available. Tried it with a fixture that would be similar but still no luck. I connected a donner dongle to the wifly transceiver that is connected to the go and my moving heads and hex pars work just fine. Can’t get the wash bars to work though. 

Hi the GO doesn't have the ADJ WiFly Wireless DMX signal in it, it's single antennae are only to communicate from iPad/tablet to the app over its built in WIFI network, its not a wireless DMX network. You would need the WiFly EXR Battery and a short DMX cable to connect the EXR to the GOs DMX output #1 port. You don't want them too close together as the EXR could interfere with the WIFI the Go uses to talk to the app. Does this make sense?
Wifly EXR: https://www.adj.com/wifly-exr-battery 

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×