Skip to main content

Help ......

I have a few questions for you folks!

I have the following light rig:
1- DMX Operator
2- DP DMX4Dimmer Packs
16 - Par 38

I just bought 2- DJ Scan 250 but I am not sure how to hook it up to my controller.Do I daisy chain them to my dimmer packs?

I have Dimmer Pack #1 dip set at 1 and Dimmer Pack #2 set at 1 and 3.

What would I change the Dimmer packs switches to?
And what would I change the Dips on the scan 250 to?

Then as far as the scanner buttons on the OPERATOR do I assign each Scan 250 a scanner button? Or do I assign both 250's to 1 button?

I currently have all of the pars assigned to 1 scanner button.

Thanks ADJ Forum Members
Original Post
Hers some answers
"What would I change the Dimmer packs switches to?"

Leave them alone

And what would I change the Dips on the scan 250 to?
Set the first to 17 which is dip switch 1&5
Set the second to 33 which is dipswitch # 1&6

Then as far as the scanner buttons on the OPERATOR do I assign each Scan 250 a scanner button?
The addresses I told you are for scanner buttons 2 and 3.

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×