help new to this

Former Member

I have my dmx softwere i cant get my 2nd light to work, in setup i put my Chauvet pin spot 360 first then put in stage ape 114-HAMPSTER par 38 and the sliders dont work!!!! but the sliders for the pin spot turn on the par 38 i have set it to start at # 6 but still dont work what do i do
thanks papa don

3/5/125:43 PM

❤️ 0

Original Post

Replies sorted oldest to newest

JinglesForum Admin

Read this: http://www.elationlighting.com...MainId=1&Category=26
Download this: http://www.elationlighting.com...MainId=1&Category=26
Let me know how it goes.
Welcome to the forums.
Sincerely,

3/6/1212:04 AM

❤️ 0

Former Member

ok thanks ill let you know.

3/6/127:21 PM

❤️ 0

Former Member

quote:
Photobucket

ok how do i use the dip switch calculator ?

3/6/128:01 PM

❤️ 0

JinglesForum Admin

where it says DMX address, type in the number of the DMX starting address for a fixture and then it will tell you which dips to have on. Make sense?
Sincerely,

3/6/129:58 PM

❤️ 0

Former Member

Ok i'll try after work today thanks so much...

3/7/126:46 AM

❤️ 0

Studio42 (Guest)

Once you get the hang of addressing, it will all make sense. You may want to use some label tape and a Sharpie and physically write the fixture address or other identifying info on it to ease your set-up, cabling and tear-down.

3/7/129:30 AM

❤️ 0

Former Member

ok thx so much works fine thanks for your help!!!!

3/7/127:07 PM

❤️ 0

Skip to main content

Add Reply

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...