Skip to main content

Do I need to be using a DMX Terminator, also it seems as if the MyDMX Go software is not working properly with the lighting fixture, for example if I press the blackout button the light should shut off right? 

As of right now it's only changing the derby color to red/ blue, the motor isn't even coming on, and the SMD Strobe and Laser aren't either?

Anyone got any suggestions?  PLEASE HELP!
(Using iPad Pro) (Updated FIRMWARE using the Hardware Manager for Mac).

Original Post

So I've got some good and bad news for you. I have the exact same problem. I have 2 kinta fx I added to my light show. After some deep research I didn't uncover much. However I did learn a few things. The my dmx go software will run pan and tilt channels as well as the color channels. My dmx go will not automatically run the motor, laser, laser motor, or the strobe effects the kinta fx offers. You can however still run the motor manually while the lights are running. I'm not sure about the black out option for the kinta. I do also have the problem when the black out button is pressed the kinta goes white instead of off. To counter this issue I actually made a preset that has all the light and motion channels at a set value. It seams very difficult to program the lights as some of the setting will randomly change as I am saving the preset.

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×