Hey all, my light copilot whent kaput. Its not working in any of the 10 channels. i have no idea. i need it for friday's job, and need a local serivce place that can fix it that is authorized by ADJ to do it.
Let me know! thx
Original Post
Replies sorted oldest to newest
Check these:
- Controller Cable (wire connecting the controller and the power box)
- Power Plug check and see if any wires are showing
- check over the manual for more troubleshooting tip.
thats why i just like the cheap 50$ power center pc 100/a i think its called
it gets power, power light comes up. i took it apart, and each channel isnt getting power, for a week , channels 1-4 and 6 worked, and now they all quit.
im out of luck
im out of luck
it gets power, power light comes up. i took it apart, and each channel isnt getting power, for a week , channels 1-4 and 6 worked, and now they all quit.
im out of luck
im out of luck
The fuse may have went out, look at that.
My Copilot 2 also just crapped out on me. I set up for a dance, and when I went to test my light setup, the Copilot was completely dead. I checked everything, but there was nothing wrong. I thought of a fuse, but as far as I can tell, the Copilot doesn't have one. It has a circuit breaker, according to the manual, but I couldn't find a reset switch (perhaps I couldn't find it because I was freaking out!) Anyway, it sucks because my pars and strobes were dead for the dance and I had to just plug all the effect lights into a power bar so they just stayed on the whole time....lame. Anyone else ever have there Copilot just completely die, or am I missing something. I'll check again for the circuit breaker reset switch.