Gigbar Move Issues

DJWardenMember

Just got my wolfmix and the first thing I've done is patch in my Gigbar Move. Unfortunately, it doesnt work as expected. The default state of the fixture is for the mover to have their shutter "blinking" slowly, the derbys are on red and rotating, the light bar is on. Further I can control the pars just fine, but ONLY the pars respond to colorfx (movers aren't doing anything). No clue how to activate the lasers or control the strobe bar. Anyone had success with setting up their gigbar move?

I got burned by mydmxgo and this is feeling like it all over again.

4/13/2210:28 PM

❤️ 0

Original Post

Replies sorted oldest to newest

Jingles8302Admin

Hi, so the fixture was just updated a few weeks ago according to the team at Wolfmix, they said to try to Re-synch the profile and add it to a new project and test it, let me know.

4/14/2212:36 AM

❤️ 0

LexShowMember

This is so sad , I also was expecting more … in the 17 ch work fine but the kintas won’t move and the movers stay white …

6/26/224:30 AM

❤️ 0

BCV_BrianMember

Anyone have any luck with resolving some of these issues? I recently picked up a WMX1 thinking it would make life easier… so far not so much. When setting up Gigbar Move to 001 in DMX, the bar strobes and derbies default to flashing and do not not come off. When setting to another channel, whole other set of issues — only one par works with programming fx but when you select the address in the fixtures list, it will turn on. Also same as others… laser useless with WMX1 so far.

9/19/228:23 AM

❤️ 0

Skip to main content

Add Reply

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...