Skip to main content

Replies sorted oldest to newest

The main problem I'm having is with the dmx channels, I have followed every youtube video under the sun on how to setup profiles and fixtures on the app but I just can't connect to my lights at all. I have a wireless dmx transmitter hooked up to the dmx out 1 and can't get my lights to receive the dmx signal. There is nothing in the manual about what the buttons do and It says L1 when connected. Any help would be appreciated thanks!

so, running two wireless systems right next to each other is never a good thing, one could be kicking off the other, your wireless could be kicking off the ipad connection or vice versa or they BOTH could be trying to use the same Wireless channel, can you try a hard wired connection to see if it even works first? If it does, i would then try to plug in the wireless DMX transmitter away from the GO hardware and even use hardware manager to change the wifi channel it uses. 

Add Reply

×
×
×
×
Link copied to your clipboard.
×