Skip to main content

Ok... where to begin, when i first got my fog storm, the tube (that goes from the fog juice bottle to the fogger its self) has 3 pinches causing less fog to get into the fogger. 1, i have tried using plyers to get out the pinches and 2, im getting alot less fog output, these pinches are getting worse and worse! My fog output has almost dropped by half! I also hear some rubling from the fog pump! Its stressing my machine! Any ideas or should i just send it back,im sure i have only had it for less than 30 days!

-Bryan Beal
Original Post

Replies sorted oldest to newest

umm, i never opened up the fogger, the fog storms fog tube is on the exterior of the fog machine. That which goes from the Fog Juice Container to the Actual Fog Machine. It like pinches the tube and in a way, collapes the tube.

Think about it like this, A human has a cloged artery not because of thick blood flow, but because he ate so many darn fries that his artery collapes, there for he dies because blood circulation was stopped from going to the heart.

Its not a matter of cleaning out the fogger, its an issue of the fog tube being poorly designed.

I need a fix for my fogger, so i guess the only thing i can do is call adj. No prob. Thanks for help anywas BC.
I know what you mean man, the cleaning solution will not fix the pinches.

Either you can:

1. (Best solution) Take it in and get a professonal to fix it. Big Grin

2. Or you can go and buy a piece of tube about the same size from your local hardware store and replace it yourself. Confused

I would go with the first option. Smiler

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×