Does any one know how to get off dmx mode on the spot 2x. I’ve bought them brand new. When you switch them on, they go straight in to dmx mode . Displaying 16 Chan 001.
I tried to select other modes. It just returns back to dmx mode.
how do I use the light from this point on. I’ve reset, ran auto test . Still the same. This happens on both lights.
Replies sorted oldest to newest
Hi, did you read the user manual?
https://d295jznhem2tn9.cloudfr...%20User%20Manual.pdf
Pages 17-20 cover the menu functions and what they do. Take a look you have a few options for non-DMX control.
Hi yes I did read but I’ll check those pages again . Thanks. Is this normal for adj products when powered on
They are all tested in DMX Mode before shipping to users, so yes they may be in DMX mode, but once you change settings, they should revert to how they are last set after a power cycle, give it a try.
Ok thanks , I’ll try and let you know asap
So I called the retailer where I purchased the 2x lights from, and they had two left. They unbowed the two and the same issue . Nothing can be selected other than dmx mode..
Hi, that is very strange, I will talk to our service department about this and we'll either reply here or reach out to you directly.
Hi , I called adj in Netherlands and they found the problem. So I’ve translated back to the retailer.
So what needed changing was the DMX State. I went to the option and change it to primary mode, then I was able to navigate through the options and choose what I wanted.
Im so relieved.
thanks for all your help.
Geff
Oh ok, I understand. Thanks for confirming.
Sorry for the confusion.
