Hello, im having a problem with led bar. Is there any possibility you could make it for me. When im trying to make it on profile builder, on dmx go application it says fixture profile might be corrupted. Here is manual for this led bar in pdf.
Replies sorted oldest to newest
Hi, for fixture profile requests please fill out this form and attach the DMX chart.
https://bit.ly/2HKpk7Z
We'll do our best to make it for you within a few business days.
done
Thanks! so i am looking at the traits, are the CREE leds warm white, then 5 sections of RGB and then another 5 of cool white leds? Just trying to figure out the pixel layout and color mixing.
i'll check, give me some time and i will replay back
warm white light, rgb, and at the end 5 white leds (can be used as strobe) all correct @Jingles8302
Hi, ok i see now. I've made the 34ch and 37ch profiles and they should appear in the app in the _varied as "Tri Effect Bar" be sure to be connected to WIFI with internet first to download the profile after you patch one in, then re-connect to the GOs WIFI and test the profile.
There really is no way for me to have the Warm white work with the color picker as it only support RGB cool white, But you can manually turn on the warm white leds, plus if you use 37ch mode there are macros.
thank you so much!!!
okay, i checked it. I have a few question is there any possibility to make those 14 lamps working with app, and can strobe work?
i also asked for light4me beam 10 fixture
Hi, I could maybe turn them to Cool white, like the strobe ones, but then they will ALL come on together.
you should have a strobe channel in the 37ch mode that i made.
I do not see the request for the Light4me 10 fixture, can you re-submit?
https://bit.ly/2HKpk7Z
ok, thanks for sending the Beam 10 traits.
the profile is now made and will also be in the _varied in just a few mins as, "Light4me Beam 10"
