Skip to main content

Hey guys,

I'm in a band and we just bought an FC-400 with an OPDM-20 4ch. DMX dimmer pack. I have all my lights (4 differents) and I would like to know how to program my customize flash/light? I figure out how to change de speed, fade, master dimmer.... but this will affect only the 16 preset programs.... I want to make my own programs..... How can I do this? thx a lot.
Original Post
Simonize,
The FC-400 will only allow you to record your own scenes.

This is how it's done.
Press the mode button until SCEN is displayed. Then press the up/down buttons to display the scene number.

Now you can enter program mode by holding the mode button down for 3 seconds. SE.S1 will appear on the display and you may now set the intensity using the up/down buttons for light # 1 of the current scene. Tap the mode button to switch to light # 2, 3 and 4. Please note that when switching to a different light # the display will change to the relevant #; for example light # 3 will display SE.S3. Once your scene is complete press and hold the mode button for 3 seconds to exit.

Hope this helps

Add Reply

×
×
×
×
Link copied to your clipboard.
×