Skip to main content

I recently bought my first DJ Spot 250 (used). It was dirty and needed a fan replacement, but after cleaning fired right up!!

The issue is the color wheel. It seems to slip and not move to the correct position. During testing, it sometimes will cycle through all colors and sometimes only move enough to use a few colors and even land inbetween colors.

The color wheel itself has some play in it (unlike the gobo wheel) which leads me to believe the motor is fine and something has broken on the shaft or wheel itself.

I would appreciate any thoughts on this.
Original Post

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×