I seem to be getting erratic behavior from the DJ Scan 250. Everything is fine for maybe 30 seconds, and then it's almost as if the unit is resetting itself (color wheel spins, mirror moves, etc..) and then goes back to the proper positions (before starting the process again). It does not lose power. While it's operating fine, the green led on the bottom flashes. When it's acting up, the led is solid.
All DMX channels seem to be working properly.
It's the 4th of 4 fixtures (the first 2 are R0b0scans, 3 and 4 are DJ Scans. The phase is reversed in the cable going from the R0b0 to the first DJ Scan, and there is a terminator in the last light (the one that acts funny).
Any ideas? Suggestions?
Thanks.
Original Post