December 2010 Profile Request thread

Hi

Here is my first profil request

I have just received my ADJ Jellydome and I would like to have the profile

In advance thank you

Hello from France

Sure thing. Look for a response from me with a link in a day or so. This is a easy profile to make though so like 1 day if that.
Welcome to the forums.
Sincerely,

Hey Jingles thanks for the profiles. They work perfectly! Now I have another probably simple one for you. The guy financing the club just bought 3 older club lights. 1-ADJ Tempest 250 msd, and 2 Tempest II's. Now I have looked at the sheets for both, and they are slightly different. My DMX only has one Tempest profile that I can find and it's only listed as "Tempest" so I'm not sure which one it is for.

Thanks,
Dallas

Wow those are old. I'll take a look.

Could you perhaps scan the two traits sheets for me? There are like 4 tempest that come up in the discontinued section. ALL are 1 channel lol. Let me know. otherwise I'll just make a profile for each of them and send them all to you. haha.
Sincerely,

Hi Jingles,

I don't find the profile that I requested in your share drop box for my ADJ Jellydome
Could you give me a link please

In advance thank you

yes you will have it by the end of the day today.
Sincerely,

Here you go. http://db.tt/mjZtmc5
Sorry for the delay.

Hey Jingles,
I found those sheets on those old Tempest 250 MSD, and Tempest II's.

http://dl.dropbox.com/u/15986343/Tempest250MSD.pdf

http://dl.dropbox.com/u/15986343/TMPST2AS.PDF

Thanks for tha help!
Dallas

Hi Jingles

No problem for the delay
I understand you're busy
I'll try it as soon as I'll be back home

Thank you very much

Ok keep me posted.
DJ holliewood I'll make those profiles today.
Sincerely,

holliewood, here are the Tempest profiles.
250MSD: http://db.tt/jZCNVLi
II/AS: http://db.tt/Ias0lIq
Sincerely,

Showtec Typhoon HTI 150. Just got 8 of these from a venue closure. Unfortunately no manuals and neither can I find any info regarding DMX traits or where to find a manual on the net! All I do know about the fixtures is that they are a 6Ch head. Any one got a profile for them? Sorry for the lack of info but I can't find any!! Cheers, Mikey.

You know what, try our DJ spot 6 channel moving head profile. The casing looks similar. Let me know how it works. The DJ spot should already be in your library.
Sincerely,

Newbie at my dmx. tried but no luck. Maybe next time i will call for an instructional lesson,

Profile for Extreme lasers CF-5rgy Cosmic Frenzy.

CF info.........


Operating Modes
DMX Operation
DMX operation gives the user freedom to create his/her own programs tailored to their own individual needs. To run this unit in DMX mode, connect the unit to any standard DMX controller via XLR connectors. Please consult DMX controller manual to determine address.
DMX Signal Levels
Channel-1 Channel-2
Range 0-255 Patterns Selection Range 0-255 Colors and Lines Selection
230-255 Sound Active Mode 233-255 Automatically change all the patterns in every 5 seconds
225-229 Effect 45 209-232 Automatically change all the patterns in every 3 seconds
220-224 Effect 44 196-208 Red + Green + Yellow, line2
：：： ：：： 183-195 Red + Green + Yellow, line1
170-182 Red + Green + Yellow, dotted line
157-169 Green + Yellow, line2
144-156 Red + Yellow, line2
131-143 Red + Green, line2
118-130 Yellow, dotted line2
105-117 Green, dotted line2
92-104 Red, dotted line2
79-91 Red + Green, line
66-78 Yellow, dotted line1
53-65 Green, dotted line1
40-52 Red, dotted line1
15-19 Effect 3 27-39 Yellow, line
10-14 Effect 2 14-26 Green, line
5-9 Effect 1 1-13 Red, line
0-4 OFF 0 OFF

Stand-Alone Operation (Auto, Sound Active Mode)
Auto mode
n The unit runs built-in program to change effects automatically. Set DIP switch pin 10 to ON, other pins to OFF to run Auto mode
Sound Active mode
n This unit has built-in program that will react to sound and music under Sound Active mode. Set all DIP switch pins to OFF to run Sound Active mode
Operating Modes (Cont.)

Master-Slave Operation (Auto, Sound Active Mode)
This mode allows user to link up to 32 units to run the Master-Slave operation. In the Master-Slave operation one unit will act as the controlling unit and the others will react to the controlling unit. Daisy chain your units via the standard XLR microphone cables in the following configuration: ‘Out’ from the first unit to ‘In’ on the second, ‘Out’ from the second to ‘In’ on the third and so on.
Auto mode
n To set the master: Set DIP switch pin 11 and 10 to ON, other pins to OFF.
n To set the slaves: Set pin 1 to ON, other pins to OFF
Sound Active mode
n To set the master: Set DIP switch pin 11 to ON, other pins to OFF.
n To set the slaves: Set pin 1 to ON, other pins to OFF
Function Selection Chart
DIP SWITCHES CHART FUNCTION
1 2 3 4 5 6 7 8 9 10 11 12
OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF ╳ SOUND MODE
OFF OFF OFF OFF OFF OFF OFF OFF OFF ON ╳ AUTO MODE
SET SOUND / AUTO MODE ON DMX MASTER
ON OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF DMX SLAVE
SET ADDRESS OFF OFF DMX MODE
╳ / : Not Used

Model NO. 5R5G/20R10G 50R20G
Classification IIIR IIIB
Laser Power 4.9~20mW red & 4.9~10mW green 50mW red & 20mW green
Weight 4Kgs
Power AC 100V~120V or 220V~240V 50/60HZ
Dimension 220mm(L)×280mm(W)×172mm(H)
Fuse 20mm×2A
Housing Iron
Beam Divergence < 1.5 mrad
Operating temperature 18℃~25℃

Hey this profile request is for on Optima 64b Led can.

Link to manual:

http://www.audiovisualrentalsv...%20Long%20Manual.pdf

Technical Data
PAR64 Black LED Specification
The PAR 64 LED is a DMX-512 controllable, full RGB color mix par can made up of highly efficient and double-sized bright LED's. All red, green and blue LED's can be controlled separately allowing the creation of an unlimited range of colors.
The PAR 64 LED can operate in Stand-Alone, Master/Slave and via DMX-512 control utilizing 5 DMX channels.

FEATURES

- Built-in automated programs via master/slave
- Built-in sound activated programs via master/slave
- Ultra bright and ultra large LED's (10mm)
- High Quality Lightweight Professional Aluminum Par 64 CAN with Double-bracket yoke
- Perfect for Mobile, Club, Stage and Architectural applications
- Easy to setup and use

LEDs ADVANTAGE:

- Save Energy
- No Lamp Replacement needed!
- Unlimited Colors - No gel Sheets
- No heat
- Fully DMX
- Light weight

Technical Information:
- Light Source:
Red: 61 LEDs
Green: 61 LEDs
Blue: 61 LEDs
- Beam Angle: 25°
- Total Output power: 12W
- Control modes: DMX, Auto, Sound, M/S (Linking)
- Channel function:
Channel 1: Red intensity
Channel 2: Green intensity
Channel 3: Blue intensity
Channel 4: Dimmer
Channel 5: Strobe Speed
- Built-in programs: Single color, multi-colors, rainbow, variable strobe

Additional Information
SKU PAR64B-LED
Manufacturer Optima Lighting
Color RGB Color Mixing
Fixture Color Black
LED Size (mm) 10
Number of LEDs 183
Power Consumption (W) 12
Voltage (V) 120v - 240v AC
Shape PAR64
Length (in) 9.25
Width (in) 9.25
Height (in) 10
Weight (lbs) 4.10

Hello everyone and Merry Christmas.

Santa brought the MyDMX software and some LED lights for which a profile would be helpful.

The lights are VRL model PAR-363 and they are LED PAR64s, each with 36 3 watt LEDs. Pretty bright!

The user manual can be found here:

http://www.ospworldwide.com/pr...=6825&idcategory=196


Here's the DMX controlling matrix:


CHANNEL FUNCTION VALUE

1 Red 0-100% dimming: 000-255

2 Green 0-100% dimming: 000-255

3 Blue 0-100% dimming: 000-255

4 Blackout: 000-010
Master Dimmer: 011-249
Full 100%: 250-255

5 No Strobe: 000-010
Strobe slow to fast: 011-255
Auto mode speed control slow to fast
(when Ch6 DMX is between value 011-138)

6 Off: 000-010
Auto Color Switch: 011-045
Auto Color Pulse: 046-090
Auto Color Scroll: 091-138
Sound to Light: 139-195
Sound to light Strobe: 196-255

~ ~ ~ ~ ~

Also, is there a way to increase the width of the fader channels that appear at the bottom of the Setup and Editor screens? The text and graphic at the top of each fader channel is quite small.

~ ~ ~ ~ ~

Many thanks for your help and for providing this forum. It is quite a valuable resource.

Bob

Hi James, regarding the profile request for the Showtec Typhoon and using the 6ch dj spot....... The showtec is rotating gobo and I'm presuming the dj spot isn't? This is all I can find on the net about the Typhoon
"Showtec Typhoon 150w HQI
150w HTI lamp, 9 colours plus white, 7 gobos all rotating,
Pan 540°, tilt 280°.
6 channels of DMX required" They arrive tomorrow so I guess i'm pretty stuck at the moment!

thanks for the profile...

Jingles / James ....

Kindly cancel my request for a profile for the VRL PAR363 LED lights.

I have returned them and will be getting the Elation OPTI RGB LED lights instead.

Thanks,

Bob

Ok thanks for letting me know.

Jingles,
Did you ever make a quad phase profile? I can use one for tonight if you have one.

http://db.tt/9StuDL7
There you go Stevie. I almost forgot you use my dmx now. Haha. Have a good gig post a pic and happy new year!

Hi Jingles,

Apologies for getting back to you so late on this one, I've just tried the personality you made for the Robe 700EAT in mode 4. Works perfectly.

Thanks and happy new year.

Thanks Glad to hear it.