COLORsplash JR./LED-PAR83 respond at dip set addresses plus one

Are you sayng they respond at one channel plus what they are supposed to be? say 5 rather than 4?

Exactly, off by +1.

F.I. For Channel 16 we want the switch for the value 16 to be on which is dip 5.

I have to set the fixture at address 17 in MyDMX. It's as if I had set dip 5 (value 16) plus dip 1 (value 1) which yields an address of channel 17.

Both units are set the same, to start at address/channel 16 and both respond starting on 17!

Weird, Huh?

Merc

When I first got MyDmx, I first started witht he colorplash Jrs, setting the dip switches to reflect the progession and I would not get nothing from MyDmx, but not changing the dip switches, I dropped the profile on #2 and went from there and everything works fine. I don't know if the default profile that comes with the program is wrong, but it should work by strating with #1. So yes, it's off by 1.

I found this out the hard way. The Splash Jr's now require 5 channels not 4.

Sorry that was confusing you guys. i did not know they changed the jr's. and its not like they are gonna let us at ADJ know right? haha
i will change the profile to 4 channels if anyone can tell me what the 5th channel does. and i will have it uploaded to the my dmx page.
Sincerely,

from what I recall it does nothing ...it is a future...I don't have my gear handy, but I believe channels 2 through 5 are your active channels. channel 1 is the "future channel".