Color Matrix Effect With Chauvet Moving Heads

djrioMember

I am trying trying to create a chaser effect using a Chauvet 4 bar Flex, 2 Chauvet Colorstrip Minis, and 2 Chauvet Intimidator LED Spot 150s. Everything but the Intimidators are working fine.

I go into the Scene Builder and place a Color Matrix effect over the fixtures but I can't get it to work on the Intimidators. I am thinking it is because they don't technically have an RGB mode, but there has to be a way to get them to work in sync with the other lights.

4/1/1610:50 AM

❤️ 0

Original Post

Replies sorted oldest to newest

JinglesForum Admin

Yes the color matrix effect is only for RGB color mixing lights, however if a moving head is included, it should use the dimmer for the effect, so you could use a color from the color wheel and it'll work closely to a similar way as the color mixing.
I think i have shown this in one of my videos, take a look, you might find some info helpful.
https://www.youtube.com/playli...WiH9AMEVTOmtkdh95uqv

4/1/1612:27 PM

❤️ 0

djrioMember

You are a life saver Jingles! Thank you so much.

4/2/166:25 AM

❤️ 0