Chauvet Slim par quad 12 DMX issue

Former Member

hi i really need an answer as quick as possible since my event is tomorrow night. im trying to make a chasing effect. for my event im going to have 8 arches with one chauvet slimpar 12 irc pro at the base of each of them with 16 total. i want to create a chasing effect so when runners run under these arches (clear and showing the lights) when arch 1 is red. i want the second arch to switch to red then make it look like each arch is following the previous arches color (3-4 color trend). im using the chase effect on MyDMX 2.0 and the timing on the lights is off just a little bit. im using the slim par TRI 12 insead of the QUAD 12 since my DMX 2.0 does not offer the QUAD. on mode 1 (7 channel) i have my lights 7 channels apart from each other and my arches are lighting up very weirdly.

thanks for your time and sorry for any confusing wording.

-Brandon

5/22/133:58 PM

❤️ 0

Original Post

Former Member

Hopfully you were able to figure this out in time for your event, but you can do this another way as well. Create a scene, label it Chase. in setup mode you then create steps. The first one is there for you already. This is for the first fixture. Set your sliders to how you want it to light up. Then add another step. black out your first fixture and then set your sliders for the second fixture and so on until you have done this for all of your lights. Then in the section where you can change the timing value....change it to how slow or fast you want your next fixture to light up. when you have done all of that, then go to user and click on your "Chase" Scene and you will see your sliders moving on their own to how you set them for each fixture. Confusing I know, but once you get the hang of it, its easy.

6/28/136:48 AM

❤️ 0

Skip to main content

Add Reply

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...