Chauvet 4Bar

Hello Mo, Welcome to the forums. i know why this is. The profiel creator software won't allow for a single fixture profile to have more than one set of RGB channels. when it was coded fixtures like that didn't exist. Unfortunately this won't change in the near future at all. At least not with my dmx. so what we have discovered is if you place from the generic folder a RGb.ssl profile in front or behind the control channels in my dmx you still can use the EFx generator with all the RGB sections and still have control of your shutter and dimmer etc channels. So i will email you a custom 3 channel profile for you to place first on the my dmx address grid then i want you to place 4 RGB profiles from the _generic folder after my custom 3 channel profile i send you. This way you will have control of all the RGB sections for the 4 bar. Understand? Let me know.
Sincerely,

Here is a picture to help illustrate what I mean.

Sincerely,

Thanks Jingles, I think I understand the concept and will give this a try. It may be a day or two before I can get to it but i will let you know how it goes. In any case i'm sure i'll having a question or two to follow. and again, many thanks.

Jingles-just wanted to get back to you and say the profile you sent me and the config. setup you indicated worked perfectly. Thanks again. I see there isn't a way within myDMX to use the built in mics on the fourbar. Is there a way to have myDMX bypassed but still connected to your fixtures and use the footswitch that comes with the fixtures. I use these lights with a live band. Would a midi controller give me more control of myDMX in a live situation or just complicate things for a guy just learning how this stuff operates. Thanks

FYI I found the answer to my questions in the music trigger topic. thanks